ENTERING AND EXITING THE ADJUSTMENT PROCESS MODE
- Before entering the adjustment process mode, press the "TV RESET" button or execute the AV position RESET in the video adjustment menu.
- Pull out the AC cord to turn off the TV.
- While holding down the "VOL (–)" and "INPUT" keys at a time, press the POWER switch of the main unit to turn on the power. The letter " K " appears on the screen.
- Press the "VOL (–)" and CH (V) keys at the same time. When multiple lines of blue letters are displayed on the screen, the unit has entered the process adjustment mode.
- If the unit does not enter the process adjustment mode (if the same display as the normal start appears), try again.
To exit the adjustment process mode
after the adjustment is done, unplug the AC cord from the outlet to make a
forced shutdown. (When the power was turned off with the remote controller,
once unplug the AC cord and plug it again. In this case, wait 10 seconds or so
before plugging.).
INITIALIZATION TO FACTORY SETTINGS
Caution: When initialization is
performed, all user setting data including the channel settings are initialized.
Be cautious when making this adjustment.
The adjustments done in the
adjustment process mode are not initialized.
Initialization.
- Enter the adjustment process mode.
- Bring the cursor on to [INDUSTRY INIT] in page 2/16.
- Select [ON] using the VOLUME [+/-] key and press the [OK] key.
- Initialization is executed. When the unit automatically exits from the process adjustment mode and the display appears on the TV, initialization is complete.
# Never shut off the power during the initialization process.
The following settings are
initialized in this adjustment.
- User setting
- Channel data (e.g. broadcast frequencies)
- Operation time
- Maker's optional setting
- Password data.
After the adjustment, cancel the
adjustment process mode.
To exit the adjustment process mode,
unplug the AC power cable from the outlet to make a forced shutdown. (When the
power was turned off with the remote controller, once unplug the power cable and
plug it again. In this case, wait 10 seconds or so before plugging.)
