Put the set in SAM mode [See details
by previous post here]. The SAM menu
will now appear on the screen. Select RGB Align and go to one of the sub menus.
The
alignments are explained below.
To store the data:
- Press OK on the RC before the cursor is moved to the left.
- Select “Store” and press OK on the RC.
- Switch the set to stand-by mode.
For the next alignments, supply the
following test signals via a video generator to the RF input:
- EU/AP-PAL models: a PAL B/G TV-signal with a signal strength of at least 1 mV and a frequency of 475.25 MHz
- US/AP-NTSC models: an NTSC M/N TV-signal with a signal strength of at least 1 mV and a frequency of 61.25 MHz (channel 3).
- LATAM models: an NTSC M TV-signal with a signal strength of at least 1 mV and a frequency of 61.25 MHz (channel 3).
Display Adjustments
Can use the default
values. The default values are average values coming from production.
- Enter SAM mode.
- Select a colour temperature (e.g. COOL, NORMAL, or WARM).
- Set the RED, GREEN and BLUE default values according to the values in the table here.
- When finished press OK on the RC, then press STORE to store the aligned values to the NVM.
- Restore the initial picture settings after the alignments.
White Tone Default Settings
|
Picture
mode
|
Styling
|
Screen
size
|
Red
|
Green
|
Blue
|
|
Normal
(9000K)
|
Thriller
|
32"
42"
|
128
128
|
121
112
|
108
112
|
|
|
Berlinale
|
32”
|
128
|
121
|
108
|
|
Cool (11000K)
|
Thriller
|
32”
42”
|
128
127
|
123
111
|
125
128
|
|
|
Berlinale
|
32”
|
127
|
123
|
123
|
|
Warm (6500K)
|
Thriller
|
32”
42”
|
128
128
|
113
103
|
70
71
|
|
|
Berlinale
|
32”
|
128
|
110
|
71
|
This group setting of colour temperature will be
applied automatically to the TV, VGA, HDMI and AV sources.
Option Settings
The microprocessor communicates with a large
number of I2C ICs in the set. To ensure good communication
and to make digital diagnosis possible, the microprocessor has to know which
ICs to address. The presence / absence of these MT5366 ICs (back-end advanced
video picture improvement IC which offers motion estimation and compensation
features (commercially called HDNM) plus integrated Ambilight control) is made
known by the option codes.
- After changing the option(s), save them by pressing the OK button on the RC before the cursor is moved to the left, select STORE and press OK on the RC.
- The new option setting is only active after the TV is switched “off” / “stand-by” and “on” again with the mains switch (the NVM is then read again).
Option Code Overview
Enter SAM mode to check the option codes. they
could not be edited in the NVM.
Display Code Overview
- Press the following key sequence on a standard RC transmitter: “062598” directly followed by MENU and “xxx”, where “xxx” is a 3 digit decimal value of the panel type:
- After resetting the Display Code, restart the set immediately.
Display Code
32PFL3606H/12 _32PFL3606H/58 _
32PFL3606H/60 => display code [122]
: Panel type > LGD LC320WUY-SCB1
32PFL5406H/12_32PFL5406H/58_32PFL5406H/60
=> display code [128]: Panel type > LTD LC320EXE-LDN1
32PFL5606H/12_32PFL5606H/58_32PFL5606H/60
=> display code [129]: Panel type
> LTD LC320EUG-LDN1
42PFL3606H/12 => display code [123]:
Panel type > LGD LC420WUY-SCB1
No comments:
Post a Comment