TO ENTER SERVICE MODE
In the case of exchanging the microprocessor IC201, or memory IC202 is necessary to reset the device.
To make adjustments to enable the machine to service following the steps:
- With the unit "ON" tune a channel with good reception or using a bar generator in RF input.
- Press the "MENU" on the remote.
- In Submenu "IMAGE", select the "Contrast".
- Enter the number "9735".
- To EXIT the service menu, turn off the TV by remote control.
To make adjustments after repairs use "ONLY"
the "FAC's" where Status is indicated
as value "VARIABLE".
It is recommend that other "FAC's" with the Status as indicated
values 'FIXED' "NO"
should be modified in terms of technical assistance, because the adjustments were made
in the factory and the change would imply a mangling the factory settings.
To save the adjustments made unplug the TV via the control remote.
Each setup menu is called "FAC"
To save the adjustments made unplug the TV via the control remote.
Each setup menu is called "FAC"
