TO ENTER SERVICE MODE
- Press "Menu" button on the remote control.
- Input digits {8,8,9,3}
- The system will be in Factory Mode.
- To exit factory mode, press 'Exit' button.
Version: The first line is the model name, and the second line is current software version.
Auto color:
The option could only be used in
the VGA and Component model. When we found the color in the two models was
abnormal. Then we can use the function to adjust it automatically.
Color Temperature
The function could adjust the Color
Temperature., used when debugging.Audio:
Dolby
Banner: When turn it “ON”, the model will be in Dolby authentication state.
Compression: Compression style. RF: atv line:AV/S-Video/YPbPr/VGA
Compression Factor: Compression
state.
Downmix: output model. MTS System: used when
debugging. The parameters only used when debugging, no need to be modified.Range Scan:
The function could make it to search the channels by differentiation the analog and digital channels.
Single RF scan:
Search channels in the frequency scope set in advance.
Factory Scan:
According to ANTENNA-ANALOG _ ANTENNA-DIGITAL _ CABLEANALOG _ CABLE- DIGITAL to search channels, used only in project debugging.
Tuner Diagnostic:
Project debugging setting, used to inspect the audio function.
Gamma:
GAMMA0.8 Middle: default setting in the program Dark: GAMMA1.2
Backlight:
Adjust the backlight.
Burning Mode:
Turn it “ON” to enter the aging model, This is
for factory run-in testing. The screen would display red, green, blue and black
screen repeatedly. Each color screen could be exam at that time.Clean Storage:
The function could make the model turn back to factory default setting.
No comments:
Post a Comment