Saturday, November 03, 2012

SONY - HCD - DP1000D _ ERROR CODES _ CDM ERROR CODES





CDM Error History CDM58D Error History Display.

11 digits are displayed after the M character.

1st digit : Indicates the error history number.  0 is the latest error.

  1. Initialization table is currently rotating 1.
  2. Initialization table is currently rotating 2.
  3. Initialization table is currently rotating 3.
  4. Currently DISC SKIP in OPEN mode.
  5. CLOSE table is currently rotating.
  6. Chucking table is currently rotating
  7. Currently performing SHIP operations.
  8. Currently performing release operations.
  9. Currently performing POWER OFF operations.
4th to 5th digits : Processing when problems occur.
  1. Currently performing SHIP operations.
  2. Currently performing POWER OFF operations.
  3. Currently initializing.
  4. Currently performing release operations.
  5. Currently in chuck stop state.
  6. Currently performing CLOSE operations.
  7. Currently performing exchange CLOSE operations.
  8. Currently performing OPEN operations.
  9. Currently performing OPEN POP UP operations.

0A. Currently performing exchange OPEN operations.

6 to 7th digits : Operations currently performed for problems which have occurred.

8th to 9th digits : Targets of processing when problems occur Same as 4th to 5th digits.

10th to 11th digits : Fixed at 00.

DVD and CD Ship Mode (No Memory Clear).

This mode moves the position to the position durable to vibration Use this mode when returning the set to the customer after repair.

Procedure:
  1. Press ‘Power’ button to turn the set ON.
  2. Press three ‘DVD’ button and ‘Power’  button simultaneously.
  3. After the “STANBY” display blinks six times, a message “LOCK” is displayed on the fluorescent indicator rube, and the DVD ship mode is set.
[DVD and CD Ship Mode (Memory Clear)

This mode moves the pickup to the position durable to vibration.  Use this mode when returning the set to the customer after repair.

Procedure.
  1. Press ‘Power’ button to turn the set ON.
  2. Press three buttons ‘Enter’ , ‘disc-1’and DVD button simultaneously.
  3. After the “STANDBY” display blinks six times, a message “LOCK” is displayed on the fluorescent indicator tube, and the DVD ship mode is set.





No comments: