REQUIRED TEST EQUIPMENTS.
- JIG-LEVER TYPE for adjusting: 1EA
- PC & MONITOR: 2EA
- BOARD for INTERFACE: IIC & ISP BOARD: 2EA
- D-SUB CABLE: 2EA
- Using the 12/15 line of D-SUB 15P 12-SDA/15-SCL
Care must be taken as afterimage phenomena
may occur about the black level part of screen If leaving pause image turned on
for more than 20 minutes (especially inner digital pattern (13 CH), Cross Hatch
Pattern (09CH) with significant black/white contrast).
PROGRAM ESTABLISHMENT
- Establish LGE Monitor Tools v1.1
- The program work and it is opened program window as seen below:
- Click the first icon. The window seen below should appear.
SET METHOD
- MCU Select: MTV512M64
- Option
R/W Option: Auto Write(Verity)
Jig Option: Myson
Transmit
Speed: Medium- Check: Just do it with blank micom.
- PORT
Chose Parallel Port (normal LPT1)
Attention: You must chose EPP when
select Rom BIAS at LPT.
DOWNLOAD METHOD
- Click the Load File.
- Locate and select the correct file from your computer.(*.hex).
- Click the Send
- When you see (ISP COMPLETE) the download is complete
No comments:
Post a Comment