Tuesday, April 02, 2013

ONE FOR ALL URC-7710 - SETUP PROCEEDINGS - UNIVERSAL REMOTE CONTROL



SETUP PROCEDURE

  1. Make sure your device (television) you wish to operate is switched on (not in standby).
  2. Find the code for your device in the Code List.  The device codes are listed per brand name. Also the most popular code for each brand is listed first. If your brand is not listed at all, try the Search Method.
  3. Press and hold down MAGIC until the red light blinks twice (the red light will blink once then twice)
  4. Enter your four-digit device code using the number keys. The red light will blink twice.
  5. Aim the ONE FOR ALL 1 remote at your device (television) and press POWER. If your device switched off, the ONE FOR ALL 1 is ready to operate your device.
  • Most TV’s do not switch back on pressing the POWER key, please try pressing a “number” key or the “TV-text off” key to switch your TV back on.
  • If your device does not respond, follow steps 1 through 5 with each code listed for your brand. If none of the codes listed for your brand operate your device, then try the Search Method, even if your brand is not listed at all.
  • Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.
CODE SEARCH METHOD
  • Switch your television on (not in standby).
  • Press and hold down MAGIC until the ONE FOR ALL 1 red light blinks twice (the red light will blink once then twice).
  • Press 9 9 1. The red light will blink twice.
  • Next, press POWER.
  • Aim the ONE FOR ALL 1 at your Television. Now press CH+ over and over, until your Television turns off (every time you press the CH+ key the ONE FOR ALL 1 will send out a POWER signal from the next code contained in the memory). You may have to press this key many times (up to 150 times) so please be patient.
  • If you skip past a code, you can go to the previous code(s) by pressing the CH- key. Remember to keep pointing the ONE FOR ALL 1 at your Television while pressing this key.
  • As soon as your television turns off, press MAGIC to store the code.
  • Most TV’s do not switch on pressing the POWER key. Please try pressing a “number” key or the “TV-text off” key to switch your TV back on.
  • If you cannot control your Television properly, please continue the Search Method, you may be using the wrong Code.
TO FIND OUT THE CODE CURRENTLY PROGRAMMED UNDER CODE SEARCH METHOD
  1. Press and hold down MAGIC until the ONE FOR ALL 1 red light blinks twice (the red light will blink once then twice).
  2. Press 9 9 0. The red light will blink twice.
  3. For the first digit of your four-digit code, press 1 and count all the red blinks. If there are no blinks, the digit is “0”
  4. For the second digit of your four-digit code, press 2 and count all the red blinks. If there are no blinks, the digit is “0”.
  5. For the third digit of your four-digit code, press 3 and count all the red blinks. If there are no blinks, the digit is “0”.
  6. For the fourth digit of your four-digit code, press 4 and count all the red blinks. If there are no blinks, the digit is “0”
  7. Now you have your four-digit code.
[Setup code list for this remote control; by next post]