Sunday, April 28, 2013

SAMSUNG LN-26B350F1 - LN-32B350F1 - TFT LCD TV - SERVICE MODE [FACTORY MODE] - ADJUSTMENTS - SOFTWARE UPGRADE - Cables & Details

TO ENTER SERVICE MODE [FACTORY MODE]
Press the remote -control keys in this sequence:
If you do not have Factory remote - control
  • MENU à INFO à MUTE à  Power on
If you have Factory remote - control
  • DISPLAY à  PICTURE ON à FACTORY
The buttons are active in the service mode.
Remote - Control Key: Power, Arrow Up, Arrow Down, Arrow Left,Arrow Right, Menu, Enter, Number Key(0~9)
Function - Control Key: Power, CH +, CH -, VOL +, VOL -,Menu, TV/VIDEO (Enter)
PANEL CHECK
You have to check Panel Maker Because of different adjustments as follows.
  • First of all, Check the label rating.
  • Label Rating File
  1. LCD PANEL MARK
  2. A:ACER(AUO) S : SEC C : CMO
  3. If not printed you could consider S(sec) panel mark.
METHOD OF COLOR CALIBRATION [AV]
  • Apply the NTSC Lattice (N0. 3) pattern signal to the AV IN 1 port
  • Press the Source key to switch to “AV1” mode
  • Enter Service mode
  • Select the “Calibration” menu
  • Select the “AV Calibration” menu.
  • In “AV Calibration Off” status, press the  key to perform Calibration.
  • When Calibration is complete, it returns to the high-level menu.
  • You can see the change of the “AV Calibration” status from Failure to Success.
METHOD OF COLOR CALIBRATION [ COMPONENT]
  • Apply the 720p Lattice (N0. 6) pattern signal to the Component IN 1 port
  • Press the Source key to switch to “Component-1” mode
  • Enter Service mode
  • Select the “Calibration” menu
  • Select the “Comp Calibration” menu.
  • In “Comp Calibration Off” status, press the key to perform Calibration.
  • When Calibration is complete, it returns to the high-level menu.
  • You can see the change of the “Comp Calibration” status from Failure to Success.
METHOD OF COLOR CALIBRATION [PC]
  • Apply the VESA XGA Lattice (N0. 21) pattern signal to the PC IN port
  • Press the Source key to switch to “PC” mode
  • Enter Service mode
  • Select the “Calibration” menu
  • Select the “PC Calibration” menu.
  • In “PC Calibration Off” status, press the key to perform Calibration.
  • When Calibration is complete, it returns to the high-level menu.
  • You can see the change of the “PC Calibration” status from Failure to Success.
METHOD OF COLOR CALIBRATION [HDMI]
  • Apply the 720p Lattice (N0. 6) pattern signal to the HDMI1/DVI IN port
  • Press the Source key to switch to “HDMI1” mode
  • Enter Service mode
  • Select the “Calibration” menu
  • Select the “HDMI Calibration” menu.
  • In “HDMI Calibration Off” status, press the key to perform Calibration.
  • When Calibration is complete, it returns to the high-level menu.
  • You can see the change of the “HDMI Calibration” status from Failure to Success.
SOFTWARE UPGRADE
Software Upgrade (MSTAR ISP Tool)
  1. Turn On the TV set
  2. Click ‘Connect’ icon on the MSTAR tool. An other window will pop up.
  3. Click ‘Read’  and choose a new S/W
  4. Click ‘Auto’ and ‘Run’.
Cables
LVDS CONNECTOR:  BN96-07766S (26”) _ BN96-07766R (32”)
CONNECTOR POWER 30P: BN39-00691L (26”) _ BN39-00691K (32”)
ASSY-SPEAKER:  BN96-04769D (26”) _ BN96-04769C (32”)
IR to FUNCTION:  BN96-11598B