Press “Source” button on the remote control, then press"2580", the service menu will be displayed.
Service mode description
- Color Temp: select a color temperature mode that you want to adjust;
G Gain: green gain for white balance adjusting;
B Gain: blue gain for white balance adjusting;
R Offset: red offset for white balance adjusting;
G Offset: green offset for white balance adjusting;
B Offset: blue offset for white balance adjusting; - Aging: to turn on or off aging mode, optional setting: On /Off;
- Auto config: Auto adjust ADC channel difference, only available in VGA mode;
- EEprom clear: reset EEPROM data to default value, all users’ program and setting will be lost;
- Panel: select different panel for factory;
- TTX language: select Teletext language, optional setting: West East Russia;
- DVD source set: to turn on or off DVD source in theuser menu, optional setting: On/Off;
- Hotel mode: to turn on or off hotel mode, optional setting: On/Off;
- Key mode: to turn on or off local keyboard, optional setting: On/Off;
- Power on: to setting the power on source, optional setting: TV Other;
- Power mode: to setting the power on mode, optional setting: Force on Memory standby;
- Volume: to setting the max sound volume when hotel mode is active;
- AGC: to setting tuner’s RF AGC value;
Color temperature adjusting: in different source the white
balance can be adjusted separated. The details as below:
- DVD&YpbPr source use same group color temperature value.
- TV&Scart source use same group color temperaturevalue.
- VGA&HDMI source use separated color temperature value.
- Auto Config: Change source to VGA mode and with gray scale pattern then enter service mode to do this item.
SOFTWARE [FIRMWARE] UPGRADE PROCEDURE
- Open the update tools Mstar ISP Utility.
- Click “Device” button and double click select correctly type (For TSUMV26 chassis select Pm25LV040 normally)
- Click “Config” button and click “Auto Detect” button confirm that the PC and ISP tool connect properly. Adjust the LPT port speed to 138K, in order to speed up update process.
- Click “Read” button then select the binary file of firmware.
- Click “Auto” button and remove the marker of “Blank” and “Verify” items. Then click “Run”, after several seconds the update process will be finish.
DOS SOFTWARE UPGRADE
- Rename the upgrading file to “MTK1389FE.BIN”.and download it to a USB device
- Enter DVD source and insert USB device to TV set.
- Press “DVD USB CARD” button, Will shown a dialog box as below.
- Press ► button on remote control, Will shown a dialog box as below,
- Wait a fewminutes(about 5 minutes) ,then DVD will restart auto .
- During upgrading time, make sure to do not power off and pull out USB device.
- After TV restart, Enter DVD setup menu in order to check the version number.
- Press “9” “2” “1” “0” button serially, You will see DVD factory menu. A dialog box will be showed as below. Marked with red circle is the version number.
