Saturday, April 20, 2013

SHARP LC-32DH510E643 - LCD TV - HOTEL MODE - SMART LOADER - SOFTWARE UPDATE


TO ENTER HOTEL MODE
There are three following ways to display the Public Mode setting screen.
Method 1: Turn on the power and enter in the Service mode as usual and select line 8 [PUBLIC MODE].
{To know how to enter Service mode, refer previous posts here}
Method 2
  • Unplug the AC power cord.
  • While pressing “VOL+” and “-->[ ]” keys at the same time, plug the AC power cord.
  • Then, when you are asked for the password, enter “0027”.
  • After this sequence the TV will turn on showing the Public Mode setting screen.
  • In another case, the screen is erased, and it operates in the ordinary mode.
Method 3
  • By special R/C code: RC table LCD, SYS CORD: 0x78, RC DATA: (HEX) 0xC7, (DEC) 199.  Then, when you are asked for the password, enter “0027”.  After this sequence the TV will turn on showing the Public Mode setting screen.
  • Is possible to select each item of function by pressing cursor UP/DOWN keys on the remote control or CH (UP/DOWN) keys on the LCD TV.
  • The setting position of each item of functions is made by pressing cursor RIGHT/LEFT keys on the remote control or VOL (+) / (-) keys on the LCD TV.
  • Set to ON the HOTEL MODE function to active it.
  • Select EXECUTE position after you set all function, and press cursor RIGHT/LEFT keys on the remote control or VOL (+) / (-) keys on the LCD TV for confirmation.
  • Unplug and plug the AC power cord to take effect all the changes.
PUBLIC MODE SETTINGS
  • POWER ON FIXED [VARIABLE FIXED].  When it is set to “FIXED” the TV is impossible to be switch off by Main Switch or Remote Control.
  • MAXIMUM VOLUME [0 60]  Is possible to set the maximum volume at limited level.
  • VOLUME FIXED [VARIABLE FIXED]  Is possible to fix the sound volume at limited level. When “FIXED” is selected the sound volume before limited is fixed.
  • VOLUME FIXED LEVEL [0 60]  If “FIXED” has been selected, is possible to set a fixed volume at the level that is chosen.
  • RC BUTTON [RESPOND NO RESPOND] If “NO RESPOND” is selected, the remote control keys are inoperative.
  • PANEL BUTTON [RESPOND NO RESPOND] If “NO RESPOND” has been selected, the set’s keys remain deactivated (Except POWER key).
  • MENU BUTTON [RESPOND NO RESPOND] If “NO RESPOND” has been selected, “MENU” key, of remote control, is inoperative.
  • ON SCREEN DISPLAY [On Off]  If “NO” has been selected, the On Screen Display does not appear.
  • INPUT MODE START [NORMAL →TV →SCART1 →SCART2 →COMPONENTS →HDMI1 →HDMI2 →AV →MEDIA PLAYER]   When any other item than “NORMAL” has been selected, the sets will start in a selected input mode at the next power-on.
  • INPUT MODE FIXED [VARIABLE →FIXED]  “FIXED” has been selected, any channels and input modes other than those selected at the start mode cannot be picked up.
  • RC PATH THROUGH [ON OFF] T.B.D.
  • HOTEL MODE [ON OFF] If ON has been selected the HOTEL MODE is activated.
  • RESET Cancel all Public Mode settings. (It returns to the factory settings)
  • EXECUTE Select this item, and press cursor RIGHT / LEFT keys on the remote control or VOL (+) / (-) keys on the LCD TV for confirmation the functions settings.
SMART LOADER
The Smartloader is a function implemented in the service software of SEES designed DH500 model intended to easily replicate the user settings of one TV into another. These settings include (but not restricted to): picture and audio, tuning set-up, language and country selection, PIN, child locked programs. Factory adjustments are not copied as they are different for every TV.
The Smartloader makes possible the user data to be stored in a memory device connected to the USB terminal of the TV that is used as reference and later load those data into other TVs by using their respective USB terminal.
How it works.
In reference TV:
  • Insert a memory device in the USB slot.
  • Enter in service mode, select Factory Menu and SMARTLOADER option.
  • Select “Save settings to USB” and press the RIGHT cursor in the remote control.
  • Wait until “OK” is displayed, the file has been successfully created in the root directory of the memory device.  In case of error, an explanation message is shown.
In TV to be cloned:
  • Insert a memory device with a file in it obtained following the above procedure.
  • Enter in service mode, select Factory Menu and SMARTLOADER option.
  • Select “Load settings from USB” and press the RIGHT button in the remote control.
  • After some seconds, “OK, reboot TV set” is displayed. In case of error, an explanation message is shown.
  • As indicated, reboot the TV to load the new settings.
  • Very important: All the TVs must have the same software version and hardware.
SOFTWARE UPDATE PROCEDURE
In order to proceed with the Software Updating do not enter into Service Mode.
The TV should be in normal operation (ON).
  • Insert the USB memory into the USB terminal with the file name “MERGE.bin” on the root directory.
  • Press “MENU”.  “PICTURE” menu appears on screen.
  • Press “” until selecting “OPTION” menu.
  • Press “” until selecting “Software update (USB) Sharp v*.*”.   The current software version is displayed.
  • Press “OK”   “Are you sure? Yes - No” message is displayed.
  • Press “” until selecting “Yes”.
  • Press “OK”.   The software update process starts.
  • “Software upgrading… **%” message appears.   The upgrading process is finished, the LCD-TV restarts.
  • Remove the AC cord and plug it again.
  • Return to OPTION menu to check that the version has been updated successfully.
NOTE:
If the TV is switched off during the upgrade process, when it gets to switched on again, the Power LED flashes:  Orange for 130 ms and green for 1.5 s, with black screen until it is detected in the USB connector a file “marge. bin.” Then the power LED will flash: Orange for 40 ms and green for other 40 ms, with black screen while the new software is uploaded.  Once the process is completed, the TV set will start automatically.