Operating System: MS Windows 98, 2000, XP
Port Setup: Windows 98 => Don’t need setup
Windows 2000, XP => Need to Port Setup.
This program is available to LCD Monitor only.
Port Setup
- Copy “UserPort.sys”file to “c:\WINNT\system32\drivers”folder
- Run Userport.exe
- Remove all default number
- Add 300-3FF
- Click Start button.
- Click Exit button.
EDID Read & Write
- Run WinEDID.exe
Edit Week of Manufacture, Year of Manufacture, Serial Number
- Input User Info Data
- Click “Update”button
- Click “Write”button.
CABLE CONNECTION
EDID DATA - ANALOGUE
Auto Gain/Offset adjustment
- Use the Pattern Generator (801GF, VG819) to authorize XGA (1024 X 768) for resolution and 16 gray scale signals for patterns. Or authorize 16 gray scale (11 gray scale) signals in accordance with VG819.
- Press the IN-START Key to convert to the adjustment mode using the adjustment (SVC) remote controller, and press VOL+ Key at the Auto Gain menu.
- Once the adjustment is completed, press the Enter Key to save and finish the adjustment.
EDID (The Extended Display Identification Data) setting
- Connect D-Sub to DVI-I Cable with DVI-I Jack.
- Select TV as an input source and press the [Instart] key on the remote control.
- Select the OPT3 from the OSD menu and set Analog or Digital for DDC data selection.
- Select Analog for analog data, and Digital for digital data.
- Connect the DDC automation equipment and write the DDC data.
DDC DATA [ANALOGUE]
DDC DATA [DIGITAL]
