- Preset "Test" Button on Remote Commander
- Section 4 : Service Adjustments
- Press the following buttons in sequence on the Remote and keep pressed for 5 seconds.
- Press <Info> à Channel 5 à Volume (+)
- Once completed, the below button operates as a TEST button.
ENTERING HOTEL MENU MODE
- While TV set in on standby, press the following sequence on the remote.
- Press [UP/DN] or [> / <] and (+) on the Remote for adjustments.
- After done go to Functions settings à Hotel Mode and select to" ON”
- The TV set resets and restarts.
- Now press “MENU" on the remote commander.
- The following menu appears confirms the hotel mode in ON.
- While the TV turns ON, the indication ‘Hotel Mode Setting in process” appears on the top of the screen. [ It will appear only few seconds]
- Press “MENU” button on remote control.
- The following menu appears on screen.
- Press [UP / DN] on the Remote and select Hotel Mode.
- Press “MENU” button on remote control.
- Press [UP/DN] and press (+) on remote control.
- The following menu appears on screen.
- Press [UP/DN] or [</>] on the Remote for adjustments.
REFER TO EACH SETTING BEFORE CHANGING HOTEL MODE TO :”ON”. ONCE TURNED “ON”
THE HOTEL MODE WILL START
HOTEL MODE SETTING MENU TREE
TO EXIT HOTEL MODE MENU
HOTEL MODE SETTING MENU TREE
- While TV set is on standby, press the following on the remote commander.
- Press “Menu” and the following menu appears on screen.
- The menu shows in normal mode.
