SHARP LC-32DH510E643 - LCD TV - SERVICE MODE - ADJUSTMENTS - FACTORY SET DATA VALUES - VIDEO SIGNAL ADJUSTMENT PROCEDURE

ADJUSTMENTS

• The unit is set to the optimum at the time of shipment from the factory.
• If any value should become improper or any adjustment is necessary due to the part replacement, make an adjustment according to the following procedure.

MAIN UNIT DUNTKF261FMxx

• Before replacing the relevant part, procure the following parts in which the data have been rewritten.

TO ENTER & EXIT SERVICE MODE [FACTORY MODE]
By key-unit.

• Unplug the AC power cord.
• Press and hold “V-” and “à[ ]” keys, simultaneously, and then plug the AC power cord.
• “K” appears on the screen.
• Press and hold “V-” and “P-” keys, simultaneously.
• “SHARP FACTORY MENU” appears.
• Unplug the AC power cord to exit of adjustments process.

By own R/C

• Turn on the TV set.
• Press “à[ ]”,”2”,”5”, “8”, “0” (the time is limited to 5 sec. approx., for enter this code).
• “SHARP FACTORY MENU” appears.
• Press “OK” on lines 5 ~ 12 to go to sub-menu.
• Press “MENU” to return to main menu.
• Press “END” to exit of adjustments mode.

FACTORY MENU     [Click on pictures to Enlarge}

Remote control key operation and description of display in adjustment process mode.
key operation

Remote control key	Keyboard unit	Function
Cursor (▼/▲)	P “▲/▼”	Moving an item (line) by one (up/down) on “Sharp Factory Menu” or submenus
OK	à[ ]	Selecting a submenu on lines 5 to 12 of “Sharp Factory Menu” or executing a function
Cursor (◄/►)	V (+/-)	Changing a selected item setting value
MENU	MENU	Return to “Sharp Factory Menu” from a sub-me

• The required input mode should be switched previously to enter the Service Mode.
• Use due care in handling the information described here lest the users should know how to enter the adjustment process mode. If the settings are tampered with in this mode, unrecoverable system damage may result.

FACTORY SET [DEFAULT] DATA VALUES [CLICK ON PICTURES TO ENLARGE]

VIDEO SIGNAL ADJUSTMENT
RGB SCART ADC

• Enter in Service mode.
• Press “▼” until selecting “ADC ADJUST” option.
• Press “OK”.
• “ADC ADJUST” menu appears.
• Press “▼” until selecting “ADJUST” option.
• Press “►”until selecting “Internal Signal”.
• Press “▲”until selecting “MODE” option.
• Press “►”until selecting “RGB”.
• Press “▼” until selecting “AUTO ADC” option.
• Press “►”, the adjustment starts.
• “SUCCESS” appears when the adjustments finish.
• Exit of Service mode.

COMPONENTS ADC

• Enter in Service mode.
• Press “▼” until selecting “ADC ADJUST” option.
• Press “OK”.
• “ADC ADJUST” menu appears.
• Press “▼” until selecting “ADJUST” option.
• Press “►”until selecting “Internal Signal”.
• Press “▲”until selecting “MODE” option.
• Press “►”until selecting “YPbPr(SD)” or “YPbPr(HD)”
• Press “▼” until selecting “AUTO ADC” option.
• Press “►”, the adjustment starts.
• “SUCCESS” appears when the adjustments finish. Note: both SD and HD are adjusted.
• Exit of Service mode.