APLLICABLE TO: SONY KDL-26U3000_KDL-32U3000_KDL-37U3000_KDL-40U3000
Remote cotnrol {RM-ED009}
TO ENTER SERVICE MODE
- Turn the Power On to the TV and enter into stand-by mode. {press power button on the remote cotnrol, after turn On the TV by its main power ON/OFF switch at its front panel}
- Press the following buttons on the remote control in sequence without allowing display time Off.
- {"(i)" => 5 => Volume(-ve) => TV| Power on}: [(i)=On screen Display button].
- The display "TT" will appear at the upper right corner of the screen, indicating that the TV is on Service Mode.
- Press 'Menu' button on the remote control.
- A screen with following will be displayed.
**********************************************************
BACKLIGHT
HDMI
SOUND
IF ADJUST
PANEL TEMP
ERROR MENU
SE2v0.10.
FACTORY DATA: 11111111
SERIAL NUMBER: 4294967295
WORKIG TIME: 0:22
************************************************************
- Move to the corresponding adjsutment item using the [Up] or [Dn] arrow buttons on the remote control.
- Press ( -> ) button to enter into required Menu Item.
- Press "Menu" button on the remote control to EXIT from service mode, after all adjustments have been done.
- NB: After carrying out the service adjustments, to prevent the customer accessing of the Service Menu, switch the TV set OFF and back ON again.
"TT" MODE
- TT mode is available by setting the TV for operation in Service Mode, as described above. OSD "TT" appears. To release the Test Mode 2: press (00, 10, 20)... twice, or switch the TV set to Stand-by mode. In TT Menu Mode, it is possible to remote the "Menu" from the screen by pressing the 'Speaker Off' button once. Press 'Speaker Off' button a second time the "Menu" will re appear. The function is kept even when the Menu is not displayed on the screen.
KEY FUNCTIONS
- Panel size confuguration.
- D A:D is shown when Digital Mode is enabled. 'A' shown, when analogue mode is enabled. Changed by TT53.
- TT ... Command prompt.
- ECS => ECS enabled. disabled [TT31].
- CBA => CBA is shown when the TV set is in CBA Mode. This Mode is available from Factory Mode-TT19. Changed by [TT27]
- Norm Fact => Normal Factory Mode. Changed by [TT19].
- DDC => DDC is enabled disabled. Changed by [TT74]
- 0 1 2:0 or 2 HDMI input toggle. Changed by [TT73]
- E => 'E' is shown when EDID WP is enabled - is shown, otherwise changed by [TT33].
- M HO => 'M' is shown when PC monitor is enabled changed by [TT37]. 'H' is shown, when Hotel Mode is enabled. Changed by [TT35]. 'O' is shown when OTRUM is enabled. Changed by [TT38] - is shown otherwise.
- C => 'C' {Default Valu} is shown when MSP Auto Carrier Mute fuunction is enabled - is shown otherwise. Changed by [TT57].
- M A:M {Default value} is shown when AM sound is demodulated in MSP. 'A' is shown when AFRIC demodulator is used. Changed by [TT72].
- N A => Previously used to indicate Clk enabled.
- T => 'T" is shown when digital test is enabled - is shown otherwise. Changed by [TT39].
- W => "W" is shown when watchdog is enable - is shown otherwise. Changed by [TT54].
- C => 'C' is shown when chip select is enabled - is shown otherwise. This mode is only available in factory mode. Changed by [TT58].
- V => 'V' is shown when visual I2C is enabled - is shown otherwise. Changed by [TT59].
- D => 'D' is shown when audio delay is enabled - is shown otherwise. Changed by [TT55].
- K => 'K' is shown when spread spectrum is enabled - is shown otherwise. Changed by [TT94].
- B => 'B' is shown for BRAVIA models - is shown otherwise. This mode is only available in factory mode. Changed by [TT56].
- S => 'S' is shown when temperature sensor is enabled - is shown otherwise. Changed by [TT52].
- L => 'L' is shown when HDMI is enabled - is shown otherwise. Changed by [TT14].
- TX is shown when teletext is centred. [Default value] - is shown otherwise. Changed by [TT14].
- H A => 'H' is shown when hybrid tuner is selected. 'A' is shown if ALPS tuner is selected. Changed by [TT51].
