When the indicating lamp lights in orange or the message "No Signal', 'Power Save" or "Invalid Scan Freq" appears on the screen, there is something unusual about the status of reception. See the Signal Check or Power Save mode or symptoms that seemingly appear to be failures in the owners guide.
SIGNAL CHECK
FRONT INDICATING LAMP
SIGNAL CHECK
When the Mode Display is set to ON, the input signal is
switched or when the Recall button is pressed.
|
A guide is displayed for the input terminal and the
horizontal and vertical sync frequency
|
When the sync signal is no longer detected.
|
|
When the input signal does not match the monitor
specifications or is in an unstable status.
|
A guide displays Invalid Scan Freq.
|
Indicating lamp
|
Power status
|
Operating
|
Off
|
Off
|
When main power switch is set og OFF
|
Lights red
|
Off [standby]
|
When the main poser switch is ON, and the OFF button on
the remote control or the Sub-Power button on the underside of the fronts of
the fame is OFF.
|
Lights green
|
On
|
When the main power switch is On, and the ON button on the
remote control or the Sub-Power button on the underside of the front of the
fame is ON
|
Lights orange
|
Off [power save]
|
When the main power switch is On, and the ON button on the
remote control or sub-power button on the underside of the front of the fame
is ON
However, the state in Power-save mode.
|