SERVICE MODE
IF AFT ADJUSTMENT
- Press [INPUT > 2 > 5 > 8 > 0] in sequence by the remote control.
- Press [CH +} or [CH -] to call an item to adjust.
- Press "Vol Up or Vol Dn" to adjust the data value to selected item.
- To 'EXIT' service mode, press the "Menu" button repeatedly.
INITIALIZATION
Enter Service Menu, as described above, and select "Option", "EEPROM" and "Hotel Option" sub menu adjustments of the items. See the tables below.
Sub menu Adjustment
ITEMS
|
PRESET
|
INTRODUCE
|
HOTEL
|
0
|
ON: HOTEL OPTION OF FACTORY MENU IS OPTIONAL.
OFF: HOTEL OPTION
OF FACTORY MENU IS NOT OPTIONAL.
|
LOGO
|
1
|
ON: DISPLAY LOGO IN NO SIGNAL OR TURN ON
OFF: NO LOGO DISPLAY
|
ADC PRESCALE
|
02E
|
SOFTWARE WILL PRESET THE DATA ACCORDING THE UNIT AND THE
DATA CAN BE ADJUSTED WHEN NEEDED.
|
SIF PRESCALE
|
02E
|
SOFTWARE WILL PRESET THE DATA ACCORDING TO PANEL AND THE
DATA CAN BE ADJUSTED WHEN NEEDED.
|
BACK LIGHT
|
FF
|
SOFTWARE WILL PRESET THE DATA ACCORDING THE PANEL AND DATA
CAN BE ADJUSTED WHEN NEEDED.
|
ALL COLOR
|
1
|
1: WHITE BALANCE
OF EACH CHANNEL AUTO OFFSET BASED ON THE HDMI WHITE BALANCE.
0: WHITE BALANCE
OF EACH CHANNEL ADJUST THE OFFSET BASE SEPERATELY.
|
EEPROM MEMORY RECALL
|
>
|
EEPROM INITILIAZATION
|
Enter service menu and set IF VCO to [1]., or press "Input > 2 > 5 > 8 > 1" to enter VCO adjust mode, adjust L109 to value 2.5V of TP105, then set IF VCO to [0].
