GE - UNIVERSAL REMOTE CONTROL_SETUP PROCEDURE

DIRECT CODE ENTRY

• Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
• Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit.
• Enter the 4 digit code from the code tables (on separate sheet).  Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
• With your device on, press ON•OFF.  If the device turns off, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.

CODE SEARCH METHOD

     If your device does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps:

1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
3. Press and quickly release the desired device button (TV, VCR, etc.). The red indicator blinks off once.
4. Press the ON•OFF button repeatedly (up to 300 times) until the device to be controlled turns off. The red indicator blinks off with each button press.
5. Press and release ENTER to install the code.

     Most users will store VCR codes under the VCR button, Cable codes under CABLE, etc. If (for example) you want to store a VCR code under CABLE, first follow the procedure for Direct Code Entry (previous page) and press CABLE in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
Code Search starts from the currently stored four digit number under that mode.  Sometimes the first code that “works” with your device may only allow limited unctionality (e.g. the MENU button might not work). There may be a code that performs more functions. Continue the code search process until the best code is found.

CODE IDENTIFICATION

     The Code Identification Feature allows you to identify the four digit library code stored under your device button. For example, if you want to find out what four digit code is stored under your TV device button, follow the six steps below:

1. Press and hold the SETUP button until the red indicator stays on. Release the SETUP button.
2. Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Press and release the SETUP button. The red indicator blinks once and remains lit.
4. To find the first digit for the code stored under the device button pressed in step 2, press each numeric button from 0-9 in turn. The number that causes the indicator light to blink is the first digit in your code.
5. To find the second digit, repeat step 4.
6. Repeat step 4 to find the third and fourth digit.  This time the red indicator turns off and stays.