Sunday, June 02, 2013

HISENSE PDP4220EU - STAND INSTALLATION - WALL MOUNTING - SERVICE MODE - Universal Remote Control Set up Codes



STAND INSTALLATION
Invert the TV, and place screen side down on a soft and flat surface.
Locate the [6*M5X12] screw and mounting points found on the base of the stand and plasma bracket.
Tighten the 6 screws.
Locate the 4 screws and mounting points found on the back of the plasma TV.
Affix and tighten these [4*M5X*12]screws.
WALL MOUNTING BRACKET INSTALLATION
CLICK ON PICTURES TO MAGNIFY 
SERVICE MODE
Enter service mode menu by follow methods:
[Balance]+[0532]:
  • Press [Balance] item, and then press number [0532] button at once.
  • WHITE BANLANCE: adjust white balance.
  • TELETEX LANGUAGE: 0 West Germany, 1 east Germany.
  • PICTURE MODE: adjust picture mode, If you adjust these data, date of all signal picture will increase same data.
  • Factory initialization: presetting signal of different country.
  • Clear mother chip settings: Don’t usually use it, except that program appears at abnormal. If you clear mother chip, and VGA colour isn't normal. You need auto colour VGA and HDTV,  advice service hadn't better use the function.
Service hadn’t better amend factory data. Because it is the better settings data.
SERVICE MODE MENU include:
NOTE: It is better amend factory data. Because it is better settings data.

Universal Remote Control Set-up codes
GE => 0073 0182 0216
RCA RCR 311W => 1138
RCA RCR 312W => 10748
AT&T UVERSE => 1112
URC 3940 => 11363  11314  10208  10009  12098 10508  10860  10753  10698  10821 10891  10780  11170  11208  10556 11074