APPLICABLE TO: SONY - KV 21FA310 - KV 21FE210 - KV 29FA310 - KV 29FS110_KV 29FE210
ENTER SERVICE MODE: REMOTE CONTROL - RM-Y195
- Press Power button on the remote control, to make the set in 'Standby' mode.
- Press {Display => Channel 5 => Volume(+) => Power} buttons on the remote control, about [1] second each.
- Service menu window will be displayed.
Display Descriptions:
- DEF => DEVICE.
- NTSC => SIGNAL TYPE.
- VIDEO 1 => CHANNEL TYPE.
- HSIZ => OSD ITEM.
- 1:35 => INITIAL DATA VALUE.
- NVM:OK
- M6J586MK-050FP F1.
- Press buttons [2] or [5] on the remote control to select an item to adjust.
- Press buttons [1] or [4] on the remote control to select OSD.
- Press buttons [3] or [6] on the remote control to adjust the data value to selected item.
- Press [Mute & Enter] buttons in sequence to write the data into memory.
Adjustment after replacement of Memory IC
- Access the Service Mode setting, as described above.
- Press button [8] on the remote control, and press "Enter" to initiliaze the new memory IC.
Confirmation of Change Mode of Service
- After finishing the settings, disconnect AC outlet, and re-connect the outlet again.
- Access Service Mode.
- Using buttons on the remote control, OSD localize the items set to confirm.
