- Turn off the projector and disconnect AC plug. Allow the projector to be cooled for at least 45 minutes.
- To remove the Lamp cover, remove the screw with a screwdriver.
- Remove 2 screws with a screwdriver and pull out the Lamp assembly by grasping the handle.
- Replace the Lamp assembly with a new one and tighten 2 screws back into position. Make sure that the Lamp assembly is set properly. Replace the Lamp cover and tighten the screw.
- Connect the AC Power Cord to the projector and turn on the projector
[LAMP TYPE NUMBER: POA-LMP54]
LAMP REPLACEMENT COUNTER RESET
- Turn on the projector and press the MENU button. The main menu appears. Select the Setting menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu.
- Choose the Lamp counter reset with the POINT UP/DOWN button, and then press the SELECT button.
- The message “Lamp replace counter reset?” is displayed. Select "Yes" with the SELECT button, and the other confirma-tion display appears. Select "Yes" with the SELECT button to reset.
- The LAMP REPLACE indicator stops lighting after the Lamp Replace Counter is reset.
