- Loosen 4 screws as red circles.
- Pull the Interface module to the right side and pull up as blue arrow.
- Loosen 5 screws as red circles.
- Loosen Tuner nut as blue circles.
- Loosen 4 screws as red circles.
- Take apart AV cover metal and Interface Board.
STAND MODULE
- Loosen 7 screws as red circles.
- Take apart the Stand Module.
- Loosen 7 screws as red circles.
- Take apart the Stand Cover and Stand Support Metal.
- Loosen 4 screws as blue circles.
- Take apart the Stand Bottom Metal and Stand Support Metal.
BACK COVER
- Take apart the Interface module and Stand Module first.
- Loosen 11screws as red circles.
- Take apart the Back Cover and TV.
SYSTEM BOARD
- Loosen 8 screws as red circles, the screw locations are around the Shielding,everyside has 2 screws.
- Loosen 1 screw as blue circles of Figure.
- Take apart the shielding.
- Pull out of all wires.
- Loosen 4 screws as red circles.
- Take apart the System Board.
KEYPAD BOARD & SPEAKER
- Loosen 5 screws as red circles.
- Take off all of connector as blue circle.
- You need pull out of speaker wire with System board connector.
- Directly take apart the Speaker.
POWER MODULE
- Pull out the power wires with Panel Inverter connector and System board connector as red arrows.
LCD PANEL MODULE
- Loosen 10 screws as blue circles.
- Loosen 4 screws as red circles.
- Loosen 4 screws as blue arrows and blue circles.
- If you take off the System Board and Power Supply before, you can direct take apart the Panel.
- Be careful to take panel one side up as blue arrow.
- Pull out the LVDS wire and Power wire.
- Take apart the Panel Module.
