Thursday, March 28, 2013

SONY WEGA KV-36FS12, KV36FS13, KV-36FS16, KV-36FS17 - TRANSPARENT BAR IN PICTURE




TRANSPARENT BAR IN PICTURE
  • With a signal applied to the “S” Input of Video 1, while viewing a component signal connected to the Video 4 input. A transparent bar that travels across the screen can be seen.
  • Add two jumpers to the UY board. Use 24AWG-insulated wires as follows:
  1. D238 Anode to R1215 ground side.
  2. D201 Anode to C1205 ground side.
Add jumper between R1215 & Anode of D238
  • R1215 (Ground side) à  G-7 Board.
  • D238 (Anode side) à G-7 Board
Add jumper between C1205 Ground side & D201 Anode side.
  • C1205 (Ground side) à H-8 Board
  • D201 (Anode side) à G-7 Board.