Saturday, March 30, 2013

HP COLOR INKJET CP-1700 - DISASSEMBLE PROCEDURE { 1 of 2 }



                                         [I of 2]
ASS'Y CLEAN OUT THROUGH SVC -C8108-67036
  • Push the two buttons located on both sides of the clean-out trough to remove it.
ASS'Y TRAY MAIN
  • Lift the output tray.
  • Pull to remove the main tray.
ASS'Y OUTPUT TRAY
  • Lift the output tray.
  • Pull to remove the output tray.
SECOND BIN SVC
  • Lift the printer off the 2nd bin SVC.
Assy. Door Main
  • Lift the Assy. Door Main.
  • Release the two tabs and remove the Door Main.
Assy. Access Door
  • Lift the access door.
  • Loosen the two catches of the access door and remove it.
Cover LIO SVC
  • Remove the LIO cover from its slot.
Duplexer SVC
  • Push the buttons located on both sides of the auto-duplex unit to remove it.
Assy. Pick Roller SVC
  • Use long nosed pliers to turn the catch clockwise.
  • Remove the Assy. Pick roller.
Case Left SVC
First remove the following:
  • Auto-duplex unit/ rear access panel
  • Assy. Pick Roller
  • Use a T-20 bit screwdriver to remove the 2*T-20 screws.
  • Remove Case Left.
                                                                                                  Contd: