ELECTRICAL ADJUSTMENTS
Electrical adjustments are required after replacing circuit components and certain mechanical parts. It is important to perform these adjustments only after all repairs and replacements have been completed. Also, do not attempt these adjustments unless the proper equipment is available.
TO MAKE SERVICE REMOTE CONTROL
- Cut “A” portion of the attached remote control unit as shown.
TO SETUP SERVICE MODE
- Use the service remote control unit.
- Turn the power on.
- Press the service button on the service remote control unit as shown.
PURITY CHECK MODE
- Enter the Service mode.
- Each time pressing [7] button on the service remote control unit, the display changes as follows.
TO INITIALIZE
- Turn the power on.
- Enter the service mode; press the service button on the service remote control unit.
- To cancel the service mode, Press [POWER] button on the remote control unit.
- Press [i] button on the service remote control unit to initialize the LCD television.
- "INITIALIZED" will appear in the upper right of the screen. "INITIALIZED" color will change to green from red when initializing is complete.
