DISASSMEBLY [REAR CASE, STAND & SHIELD ASS'Y]
Remove the 15 screws (T4 x 16). [1]
Remove the two screws (M4 x 12). [2]
Remove the 17 screws (M4 x 8). [3]SHIELD ASS'Y & STAND ASS'Y
Remove the nine screws (M3 x 8). [4].
Remove the four screws (M4 x 12). [5]
Remove the stand. [6].ANALOG, DIGITAL & EMI FILTER
Remove the six screws (M3 x 8) [7]
Remove the eight screws (M4 x 8). [8].
Remove the connector (right →center →left). [9]
Remove the ANALOG DIGITAL EMI FILTER. [10]
REMOVE THE ASS'Y BRKT V-SUPPORTER L AND R
Remove the four screws (M3 x 8) to release the ASSY BRKT
MAIN. [11].
Remove the four screws (M5 x 12). [12]
Remove the eight screws (T4 x 16). [13]
Remove the five screws (M3 x 8) to release the SMPS. [14]
REMOVE THE SHIELD SIDE
Remove the three screws (T4 x 16). [15]
Remove the screw (M4 x 10). [16]
Remove the three screws (M4 x 8). [17]
PDP PANEL
Remove the two screws to release the LED PCB. [18]
Remove the eight screws (T4 x 14) to release the SPEAKER
L/R. [20]
PARTS LIST [NP42H5MF01PA/PB]