- Switch off the power and disconnect t he power cord from the wall outlet.
- Be sure to use a memory IC written with the initial setting data.
- Connect the power cord to the wall outlet and switch on the power.
- Confirm the system constant value. [12.SYSTEM (SYS) do not adjust normally. The adjustment should not be done without signal.]
TO ENTER SERVICE MODE
- Press the SLEEP TIMER key and set SLEEP TIMER for [0 min].
- Before disappear the display of SLEEP TIMER settings, simultaneously press the DISPLAY key and VIDEO STATUS key of the remote control unit.
- The SERVICE MENU screen will be displayed.
Click on image to Enlarge
HOW TO ENTER THE 12.SYSTEM
- While the SERVICE MENU is displayed, select the 12.SYSTEM(SYS) item with FUNCTION ( ▼/▲) keys, and the FUNCTION (< | > ) keys is pressed, the screen will be displayed.
- If the value is different, select the setting item with the FUNCTION (▼/▲) keys and adjust t he setting with the FUNCTION(< | > ) keys. (The letters of the Selected item are displayed in yellow. )
- When adjustment has completed, the values store into memory IC automatically.
- Press the EXIT key to return the SERVICE MENU screen.
- Then press the EXIT key again to return the normal screen.
12.SYSTEM (SYS) [System constant setting]
USER SETTING
- Check the user setting items according to TABLE.
- Where these do not agree, refer to the OPERATING INSTRUCT IONS (USER'S GUIDE) and set the items as described.
