VIDEO PATTERN CONDITION
- POWER PCB Adjustments mean that you should set the following 2-type power voltages to the values which were already adjusted by PDP module (LG Module) maker. Therefore, if there are some problems in picture after adjusting, you should classify that PDP module as a fault and contact to PDP module maker.
Vsus [SUSTAIN VOLTAGE]: DISCHARGE SUSTAIN VOLTAGE
- Measurement equipment : Digital Volt Meter ( DC Volt mode )
- Adjusting TP : TP204.
- Adjusting Location : RV203.
- Optimum Adjusting Voltage : Voltage which is written in Label which is at upper right side of PDP Module. (Typical Voltage : 190 V)
POWER CONNECTION & VOLTAGE ADJUSTMENT LABEL
Vadd (Address Voltage) : DATA Input Voltage.
- Measurement equipment: Digital Volt Meter (DC Volt mode)
- Adjusting TP : TP206.
- Adjusting Location: RV204.
- Optimum Adjusting Voltage: Voltage, which is written in Label, which is at upper right side of PDP Module. (Typical Voltage: 65 V)
POWER PCB VOLTAGES [Click on images to Enlarge]
- P2 is connected to P5 of Y-SUS PCB.
- P3 is connected to P1 of Z-SUS PCB.
- P6 is connected to P6 of Y-SUS PCB.
- P4 is connected to PA4 of VIDEO PCB.
- P5 is connected to PA5 of VIDEO PCB.
- P7 is connected to PA6 of JACK PCB.
BASIC CONFIGURATION
Applied Voltage level is specified at the time,
when full white pattern displayed on panel.
PCB DETAILS
