CHECKMATE RT-U50 _ UNIVERSAL REMOTE CONTROL _ PROGRAMMING INSTRUCTIONS

TO PROGRAM CABLE SET-TOP TERMINAL

1. Turn on your cable set-top terminal.
2. Press [DEVICE], then [MUTE] together - hold both buttons down until the lighted mode buttons start blinking in sequence.
3. Press [CABLE]. The [CABLE] button lights up.
4. From the Cable Setup Code list, locate and enter the 3-digit code for your brand and model.
5. Press [CABLE] to lock in the code. The [CABLE] button will blink and go out.

TV | VIDEO | DVD OR OTHER AUDIO DEVICES

1. Turn on the device you wish to program (i.e., TV, VCR,DVD or AUDIO)
2. Press [DEVICE], then [MUTE] together - hold both buttons down until the lighted mode buttons start blinking in sequence.
3. Press [TV] (or [VCR], [DVD] [AUDIO]). The button of the device you wish to program will light up.
4. [a] Press and hold [CH UP]until your device turns off. As soon as your device turns off, release [CH UP]

OR

From the Setup Code list of your device, locate and enter the 3-digit code until your device turns off. If multiple codes are listed, you may have to enter several 3-digit codes until your device turns off.

• Press [MUTE].

A. If your device turns back on, press [TV] (or [VCR], [DVD] [AUDIO]) to lock in the code. The button will blink and go out.

B.  If your device doesn't turn back on, repeat steps 4 and 5 above until you can turn your device off and on.

PROGRAMMING TV / VCR COMBI

•  First, program your remote for the TV functions
•  Find a TV Setup Code that operates the TV functions (power, VOL UP|DN, mute, CH UP|DN, 0 – 9) of your TV / VCR unit.
• Then, program your remote for the VCR functions
•  Enter, lock and test each 3-digit VCR Setup Code until a code is found that operates the VCR functions (play, stop, fast-forward, rewind, pause, record) of your TV / VCR unit.

Note: You can not use the Point and Press™ Programming method to program the VCR functions of your TV / VCR unit.

PROGRAMMING A SECOND TV | VCR | DVD

• Instead of programming an Audio device, you can program your remote to operate a 2nd TV, 2nd VCR, or 2nd DVD player.
• To program a 2nd TV to your remote’s [AUDIO] button…

1. Turn on your 2nd TV.
2. Press [DEVICE], then [MUTE] together - hold both buttons down until the lighted mode buttons start blinking in sequence.
3. Press [AUDIO], then [TV]. The [AUDIO] and [TV] buttons will start blinking.

• 4a.  Press and hold [CH UP] until your 2nd TV turns off. 
• As soon as your 2nd TV turns off, release [CH UP].

OR

• b. From the TV Setup Code list, locate and enter the 3-digit code until your 2nd TV turns off. If multiple codes are listed, you may have to enter several 3-digit codes until your 2nd TV turns off.

Press [MUTE].

a.  If your 2nd TV turns back on, press [AUDIO] to lock in the code. The [AUDIO] button will blink and go out.

b.  If your 2nd TV doesn’t turn back on, repeat steps 4 and 5 above until you can turn your 2nd TV off and on.

NOTE:   when using the Point and Press™ Programming method (step 4a.). If you find a code that turns your 2nd TV off but not back on, you may have gone past the correct matching code. Try pressing [CH DN] one step at a time until find a code that turns your 2nd TV back on.  If you want to program a 2nd VCR or DVD player in the above example, you would press [AUDIO], then [VCR] or [DVD] in step 3., then follow steps 4. and 5. referring to the Video Setup Code list.

PROGRAMMING VOLUME CONTROL

When you first program your remote, volume / mute are controlled through your TV (except AUDIO volume which defaults to the AUDIO device).

The volume control options in each mode of the remote are:

• CABLE TV (default), Cable or Audio.
• TV TV (default), Cable or Audio.
• VIDEO TV (default), Cable or Audio.
• DVD TV (default), Cable or Audio
• AUDIO Audio device (default), Cable or TV.

To control volume / mute through your cable set-top terminal in the remote’s cable mode:

1. Press [DEVICE], then [MUTE] together - hold both buttons down until the lighted mode buttons start blinking in sequence.
2. Press [CABLE] to select the cable mode. The [CABLE] button lights up.
3. Press [VOL UP], then [CABLE] for cable volume. The [CABLE] button will blink and go out.

To return volume control back to your TV, repeat steps 1. and 2. above, then press [VOL UP], then [TV] in step 3.

Code list are given by previous post.   >>> FOR MORE >>