HOW TO EJECT A STRUCK DISC
- Remove the screws. Remove top and bottom covers.
- Remove the screws. Remove the DVD mechanism module.
- Rotate the gear upward.
- The disc will be ejected.
OR
- Remove the top cover of the DVD mechanism.
- Lift up the clamp holder, and remove the disc.
MESSAGE
|
CAUSE
|
ACTION
|
Loading
|
Disc is being read
|
Please wait, it may take several minutes for some disc or
storage device.
|
No Disc
|
Disc is dirty
Disc is upside down
Disc not
present in loading Compartment
|
Clean disc with soft cloth
Insert disc with label side up
Insert disc
|
Bad Disc
|
Disc is dirty
Disc is upside down
|
Clean disc with soft cloth
Insert disc with label side up.
|
Unknown disc
|
Disc format is not compatible with this unit
|
Change another disc.
|
Region Error
|
DVD is not compatible with region code of unit
|
Use discs with
corresponding regional
code.
|
Error
AMP ERROR
|
Illegal mechanism operation
Unit fails to
operate or speaker connection is incorrect; protective circuit is activated.
|
Press EJECT key for 5 seconds to reset loading mechanism.
Check the
speaker connection. If the
message fails to disappear even after the engine is
switched off/on, contact your dealer or an authorized Pioneer Service Station
for assistance.
|
