All system, geometry and
white balance alignments are performed in production service mode. Before
starting the production mode alignments, make sure that all manual adjustments
are done correctly.
- To start production mode alignments enter the main menu by pressing “M” button and then press the digits 4,7, 2 and 5 buttons. respectively.
- After entering the Service menu, you can access its items by pressing “▲/▼” buttons. In order to enter selected menu, use “◄/►” buttons.
- To exit the service menu press “M” button.
ADJUST MENU SETTINGS
- In order to enter Adjust menu, move the cursor to Adjust parameter by pressing “▲/▼” buttons in Service Menu and press “◄/►” button.
OPTION MENU SETTINGS
- In order to enter Options menu, move the cursor to Options… parameter by pressing “▲/▼” buttons in Service Menu and press “◄/►” button.
- There are 50 items in the OPTIONS menu, but 10 of them are seen when you first enter the menu. Using “▲/▼” buttons remaining items can be seen.
