SOFTWARE UPGRADE PROCEDURE
- Start the CD burning software & create a folder named "UPG_ALL", B. Read out the software versions to confirm upgrading
- Then copy the Bin file (unify.bin.bin) into it,
- Burn the data onto the blank CD.
UPGRADE SOFTWARE VIA DISC
- Power on the set and insert the prepared Upgrade <Version Info.>, then press <OK>, the software version CDR. and other information will display on the TV screen as below:
- The set will starts reading disc & response with the Model:BDP2XXX following display on TV screen: Versions Now searching for upgrade software! System SW:X.XX Please wait …
[STILL]
- Press <ok> button to confirm, then screen will display : please visit This link Software upgrades for this player have been found, do you upgrade?
[CANCEL] [START]
- Press Right cursor button to choose "Start", then press <OK>;
- The software will upgrade and screen will display as below:
- Upgrade is ongoing, Please wait … do not unplug or switch off the device.
- The screen will display as below when upgrading complete:
- Upgrade has completed successfully! Power off after 1s.
[POWER OFF]
- Restart the set.
SOFTWARE UPGRADE VIA NETWORK
- Setup the network connection.
- In the Home menu, select <Setup>-<Advanced>- <Software update>-<Network>. You are prompted to start upgrading processes if upgrade media is detected.
- Follow the instructions on the TV screen to confirm update operation. Once software updated is complete, this player automatically turns off to standby.
- Disconnect the power cord for a few seconds and connect again to turn on the player.
SOFTARE UPGRADE VIA USB
- Go to www.philips.com/support to check if the latest software version is available for this player.
- Download the software onto a USB flash drive.
- Insert the USB flash drive to the USB jack of the rear panel.
- In the Home menu, select <Setup>-<Advanced>-<Software Updade>-<USB>.
- Follow the instructions on the TV screen to confrim update operation. Once software update is complete, this player automatically turns to standby.
- Disconnect the power cord for a few seconds and connect again to turn on the player.
TO READ OUT THE SOFTWARE VERSION TO CONFIRM UPGRADING
- Power on the set and open the tray door.
- Press <Home> button on the remote control.
- Select <Setup>, then press <OK>.
- Select <Advanced>, press right cursor to choose <Version Info.>, then press <OK>, the software version and other information will display on the TV screen as below:
Model:BDP2XXX
Versions
System SW:X.XX
Ethernet MAC:XX-XX-XX-XX-XX-XX
- For more information, frequently asked questions and software updates visit this link.
Caution: The set must
not be power off during upgrading, otherwise the Main board will be damaged
entirely.
Specifications
USB
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class (UMS)
File system: FAT16, FAT32
Support HDD (a portable hard drive disc):
an external power source may be needed.
Main unit
Power supply rating: AC 110-240V, 50/60 Hz
Power consumption: 14 W
Power consumption in standby mode: < 1 W
Dimensions (w x h x d): 360 x 44 x 210 (mm)
Net Weight: 1.26 kg
Accessories supplied
Remote control and a battery
HDMI cable
User manual
