SERVICE MODE [FACTORY MODE]
- Enter the factory menu (can use the IR and press the remote key “vol-”to “0’, press mute remote key ,then press 9,7,3,5 remote key.
- Press right key to enter the sub-menu.
- Press MENU key to return the main-menu.
ANALOG BOARD SOFTWARE UPDATE
- Prepare MTKTOOL UPDATE, update board, serial line.
- Connect PC, update board, and J3 on the main board with serial line
- Provide the STB +5V for main board
- Open “MtkTool.exe” in MTK TOOL program, and set the parameter as below picture
- Press “Browse” for selecting the SW.
- Press “Upgrade” to download the SW. It will be OK when it show “100%”
- After downloading SW, it will be long time for Initializing EEPROM.
AN ALTERNATIVE METHOD IS
- Preparative is same with above.
- Set SYSTEM->FactoryKey on factory MENU to OFF. Connect the device as below picture.
- Update the SW follow solution1- (3), (4), (5), (6)
