INITIALIZATION
To put the
program back at the factory-default, initialize the Analog/Digital Color
Television as the following procedure.
- Use the service remote control unit.
- Turn the power on. (Use main power on the TV unit.)
- Press [SLEEP] button on the service remote control unit to enter the Service mode.
- Press [VOL Dn] button on the service remote control unit twice, and confirm that OSD indication is “7F = FF.” If needed, set it to become “7F = FF” by pressing [CH Up / Dn] buttons on the service remote control unit.
- Confirm that OSD indication on the four corners on TV screen changes from on and off light indication to red by pressing a [INFO] button. (It takes one or two seconds.)
- Turn the power off by pressing main power button on the TV unit, and unplug the AC cord from the AC outlet.
