DG-BOARD REPLACEMENT PROCEDURE
- Remove the rear cover.
- Remove the screws (6 pcs) and the screws (2 pcs) (TC-20LA1) / (1 pcs) (TC-17LA1) and detach the shield plate and Inverter plate (U, D).
- Remove the screw (1 pcs) and the screws (4 pcs) and detach the lock hinge plate.
- Disconnect the flexible cable (DG1 and DG3 (TC-20LA1)/DG4, DG5 (TC-17LA1)) and remove the screws (2 pcs) and detach the DG-Board.
- Caution: PCB Fixing screws driving torque: 0.2-0.3 N·m (2-3kg·mm). Do not tighten screws so hard.
V-BOARD REMOVAL
- Remove the screw (1 pcs) and the screws (4 pcs) and detach the lock hinge plate.
- Remove the screw (1 pcs) and disconnect the couplers (V2 and V3) and the flexible cable (V9) and detach the V-Board
- Caution: PCB Fixing screws driving torque: 0.2-0.3 N·m (2-3kg·mm). Do not tighten screws so hard.
