MODEL NAME: HT-C5500
MODEL CODE: HT-C5500/XAO
BUYER - REGION CODE SETTING METHOD [INSERTING REGION CODE AFTER REPLACING THE MAIN PBA]
After replacing the Main PBA
and System Micom (IC1302), the region code should be inserted.
The unit will not work
properly if you do not insert the correct region code. You must use the remote control.
- Selet “AUX” Mode. And then press the “TUNER MEMORY” button on the remote control for 4-5 seconds.
- After step (1), you should see the “T-MODE” message display on the VFD. Press the “down” direction button during this message. [* The “T-MODE” indicator on the VFD only appears for a very short time.]
- After step (2), you can see “TEST − −” on the VFD. Insert the number “46” to select the Region Code.
- After step (3), you can see “− − −” on the VFD. Insert the Region Code corresponding to the model and area in which you reside in using the “0-9” buttons on the remote control. And then turn off the power.
- For checking if the input is well-done correctly, please do Number 1, 2, 3 again and then during “TEST − −” MODE insert number 47.
After
that, you can check the option code which you inserted.
For example, you can see “000US5”. It means that you
inserted region code “000” and the region is USA which supports 5.1CH Audio
output. If it is “047EU2”, it means that you inserted region code “047” and the
region is Europe which supports 2.1ch Audio output.
TO CHECK FIRMWARE VERSION
METHOD-1
- Open the tray.
- Press and hold “INFO” button on the remote for 5 seconds
=================================
S/W : HTB-C5500USC_0014
Front : HTB-C5500WM_0001
Loader : HTB-C5500WWL_1.00
DSP : 00/00/012 CEC :
02/15/32
Region : A/1 (BD/DVD)
Macrovision : BBS61
Model : HTB-C55xxUS
ESN-SSBCD__________________________
BD/DVD Adjust : OK
================================
METHOD-2
- Press “MENU” on the remote control
- Setup → System Setup → System Information
EXPLANATION OF FIRMWARE TERMS
- S/W : BACKEND Firmware
- Front : System micom
- Loader : Loader Firmware
- DSP : DSP firmware CEC : CEC firmware
- Region : BD region code / DVD region code
- Macrovision : Macrovision version
- Model : Model name
- ESN : Netflix serial number
- BD/DVD Adjust : Loader Disc Adjust (only factory possible)
TO UNLOCK PARENTAL LOCK [IF PASSWORD DID FORGOT]
Cold start method [Initialize Setup]
- This is useful when one forgets their Parental Lock password.
- Press “Stop” button on the front panel for over 5 seconds during the ‘no disc’ status.
- Then, VFD sign : ‘Initialize’ → Power will be turned off automatically.
- System Micom Cold Start
During Stand-By, just press
the Stop Button on the Remote Control for 5 seconds.
Then, the Red LED should blink.
TO UPDATE FIRMWARE
This menu allows you to
upgrade software in order to improve the performance of the unit or to acquire
additional services. In addition, you can also check the current software
version, update via Internet, and set the Auto upgrade notification by using
this menu. If the product is properly connected to the network via cable or
wireless, then it will automatically
connect to our website each time it is turned on and will download files in
order to update itself.
- To select By Internet, press the “ENTER” button. You will be noticed with a popup message if it finds a software program to update.
- If you select Yes, it will turn off automatically before restarting. (Never turn it on manually.)
- The update progress popup will appear. When the update is completed, it will turn back off automatically.
- Press the “POWER” button to turn on the product.
[Note]
# Update will be completed
when the product turns off after two times of restarting. Press the POWER
button to turn on the updated product for your use. Never turn off or on the product manually during the update
process.
## Samsung Electronics shall take no legal
responsibility for product malfunction caused by an unstable Internet
connection or consumer negligence during software upgrade.
You can update software in
any of the two ways as follows : Software update is the same as in the By
Internet menu.
* USB : Visit www.samsung.com/bluraysupport,
then download and store the latest software (RUF file) into the USB flash drive. Connect the
USB flash drive to the USB port of the product (disc tray must be empty) to
update the software, then follow the on-screen instructions.
**
CD/DVD : Visit www.samsung.com/ bluraysupport, download and write the latest
software (RUF file) onto a disc. Insert and play the disc in
the product to start the update, then follow the on-screen instructions.
[Note]
- If you want to cancel the upgrade in the process of downloading the upgrade data, press the ENTER button.
- When the system upgrade is done, check the software details in the software Upgrade menu.
- Do not turn off the product during the System Upgrade, as it may cause the product to not work properly.
- Do not use USB devices other than USB Flash Drives to do software upgrades using the USB Host jack.
