TOKAI LT-VHS-36 (T6608FJ) _ SERVICE MODE & OPTION MODE

TO ENTER SERVICE MODE

After replacing the IC202 (Memory) or Main CBA, the set value in IC202 (Memory) will be lost. So it is necessary to set up or adjust in the Service mode after its replacement.

• Turn the power on. (Use main power on the TV unit.)
• Press [STANDBY/ON], [2], [7], [1], and [MUTE] buttons on the remote control unit in that order within 5 seconds.
• To cancel the service mode, press [STANDBY/ON] button on the remote control.

OPTION CODE SETUP

1. Enter the Service mode.
2. Press the [STATUS] button on the remote control unit. The option code appears on the display.
3. If needed, input the option code (0129) using number buttons on the remote control unit.
4. To reset the software, press [PAUSE] and [5] buttons on the remote control unit.  The option code is changed.