TOSHIBA - LE3252i(A) _ LE4052i(A)_LE4652i(A)_LE5552i9A) _ SERVICE MODE & SOFTWARE UPDATE

CHECKING THE SOFTWARE VERSION

1. Using the Remote Control in the Picture menu, type "2008".
2. This option opens the Menu Factory's machine.

UNLOCKING DEVICE

• If the customer forget the lock code inputs / classification indicative enter the code "1980" to unlock

KEY OPERATING SERVICE MENU

• Use the "Enter" key to access the service menu, press "Menu" to go back one menu
• Previous keys and [DN] / [UP] [ < and > ] to select or adjust.

UPDATE SOFTWARE BY USB

• The software should be written "MstarUpgrade.bin" to be installed in the root (not put – it in folders or subfolders) from a USB device.
• Connect the device to the USB2 port (terminal XS616)

Can use the User menu to update - it:

• Open the menu and move to the Menu "Config." Sub-menu select "Update Software (USB), USB select and confirm the option "Yes".

You can upgrade as follows:

• With the TV on standby and pen drive plugged in, press and hold the POWER button on the front panel of the TV until you see a blue screen with the bar percentage of SW update.
• In all updates, you must wait a full update of the software.
• After the update should make the "Factory Reset" and after that turn off and on the TV electricity.

SETTING THE GAIN VIDEO (after replacing the LCD panel or Software Update)

• ADJUST GAIN ADC (OFFSET) COMPONENT VIDEO AND RGB-PC
• Connect a signal color bars or gray scale at the entrance to be adjusted, Component (YPbPr) or RGB-PC.
• Select the entry to be adjusted (Component or PC) and then enter the Mode service
• Select the setting menu "ADC ADJUST".
• From the "ADC ADJUST", select the "AUTO ADC" and start auto adjustment through the directional keys ["<" or ">".]

Note: In the Component input (YPbPr) must be set in HD (720 or 1080) and SD (480).