- Press “POWER OFF”, then “▲”and “ENTER” at the same time.
- Once more press “POWER ON”and go into the FACTORY MODE.
FIRMWARE UPGRADE PROCEDURE
When you receive
the returned monitor, please check whether the firmware version is the latest. If not, please do the following procedures
to upgrade it to the latest version.
Equipment Needed
- Fixture for Firmware Upgrade
- PC (Personal Computer)
- LPT Cable
- Firmware Upgrade Program
- One additional monitor for checking the program execution
SETUP PROCEDURE
- Connect P2 of Fixture with printer port of PC by LPT Cable.
- Connect Power Cord to Monitor.
- Connect PC to the additional monitor.
ISP DOWNLOAD PROGRAM PROCEDURE
HARDWARE CONNECT STATUS
DOWNLOAD ISP PROGRAM
- Execute ISP.exe
- Select ISP mode
- Select Erase All
- Load file
- Run Finish
Click on the pictures to Zoom In
