PANASONIC TC-17LA1_TC-20LA1 _ DISASSEMBLE METHOD _ BACK COVER & AP-BOARD

DISASSEMBLE PROCEDURE [BACK COVER]

• Remove the screw (1 pcs), and detach the hinge cover and the AV cable cover.

• Remove the screws (9 pcs) (TC-20LA1) / (7 pcs) (TC-17LA1), the screws (2 pcs), and the screws (4 pcs), and detach the rear cover and top cover.

AP-BOARD DETACHMENT

• Remove the screws (6 pcs) and the screws (2 pcs) (TC- 20LA1) / (1 pcs) (TC-17LA1) and detach the shield plate and Inverter plate (U, D).

Disengage the shaft holder hook and detach the power button shaft.

Remove the screw (1 pcs) and the screws (4 pcs) and detach the lock hinge plate.

• Caution:  PCB Fixing screws driving torque: 0.2-0.3 N·m (2-3kg·mm).  Do not tighten screws so hard.

• Remove the screw (1 pcs) and disconnect the couplers (B2(AP2) and B3 (AP3)) between B-Board and the AP-Board.
• Disconnect the couplers (AP4, AP6, AP8 and AP10) the flexible cable (AP1 and AP9) and remove the screws (3 pcs) and detach the AP-Board.