COLD RESET
The cold reset clears data except DVD data stored in the RAM to initial conditions. Execute this mode when returning the set to the customers.
- Press the [POWER] button to turn the power on.
- Press two buttons of [POWER], [DISPLAY]and touch the [STOP] sensor simultaneously.
- The message “COLD RESET” is displayed on the fluorescent indicator tube, then become standby mode.
PANEL TEST MODE
This mode is used to check the fluorescent
indicator tube, LED, model, destination, software version and key.
- Press two buttons of [DIMMER] , [DIRECTION] and touch the [X] sensor simultaneously.
- All LEDs and segments in fluorescent indicator tube are lighted up.
- When you want to enter the software version display mode, touch the ( |<< ) sensor. The model name is displayed.
- Each time( |<< ) sensor is touched, the display changes from destination, MC version, SYS version, UI version, DVD version, ST version, TA version, TM version, TC version in this order, and returns to the model name display.
- When ( >>| + ) sensor is touched while the version numbers are being displayed except model name and destination, the date of the software creation appear. When ( >>| +) sensor is touched again, the display returns to the software version display. When ( |<< ) sensor is touched while the date of the software creation is being displayed, the date of the software creation is displayed in the same order of software version display.
- Press the [DSGX] button, the key check mode is activated.
- In the key check mode, the fluorescent indicator tube displays “K 0”. Each time a button is pressed, “K 0” value increases. However, once a button has been pressed, it is no longer taken into account.
To release from this mode, press three buttons in the same
manner as step 1 or disconnect the power cord.
MEMORY CLEAR MODE
This mode moves clears main microprocessor
data stored in the RAM to initial conditions. Use this mode when returning the
set to the customer after repair.
- Press the [POWER] button to turn the power on.
- Touch the [DVD] sensor to select the “DVD”.
- Press the [EQ SELECT] button and touch two sensors of [DVD], (X) simultaneously.
- After the “STANDBY” blinking display finish, the message “MECH A LOCK” is displayed on the fluorescent indicator tube.
DISC SLOT LOCK
This mode let you lock the disc slot. When
this mode is activated, the disc will not eject when [EJECT] button is pressed. The message “LOCKED” will be displayed in
on the fluorescent indicator tube.
- Press the [POWER] button to turn the power on.
- Touch the [DVD] sensor to select the “DVD”.
- Touch the [X] sensor and press the [EJECT] button simultaneously and hold down until “LOCKED” or “UNLOCKED” displayed on the fluorescent indicator tube (around 5 seconds).
TUNER SETUP CHANGE
(Except Saudi
Arabian and Russian models)
The step interval of AM channels can be
toggled between 9 kHz and 10 kHz.
- Press the [POWER] button to turn the power on.
- Touch the [TUNER/BAND] sensor to select the “AM”.
- Press the [POWER] button to turn the power off.
- Touch the [|<<-] sensor and press [POWER] button simultaneously.
- The set power on automatically. The message “AM 9k Step” or AM10k Step” displayed on the fluorescent indicator tube and thus the channel step is changed.
FUNCTION NAME CHANGE
This mode let you change from VIDEO to SAT and vice-versa.
- Press the [POWER] button to turn the power on.
- Touch the [VIDEO/SAT] sensor and press [POWER] button simultaneously. The set power on automatically and the function will changed to SAT. Do the same procedures again to change from SAT to VIDEO.
COLOR SYSTEM CHANGE
(Except Latin
American and Russian models)
This mode let you change the color system
of the video output from PAL to NTSC or vice-versa.
- Press the [POWER] button to turn the power on.
- Touch the [DVD] sensor to select the “DVD”.
- Press the [POWER] button to turn the power off.
- Touch the [PAUSE] sensor and press [POWER] button simultaneously.
- The message “COLOR PAL” or “COLOR NTSC” will be displayed on the fluorescent indicator tube.
