SAMSUNG SYNCMASTER 740NW _ 940NW _ ALIGNMENTS SERVICE MODE & ADJUSTMENTS _ LCD MONITOR

REQUIRED EQUIPMENT

• Computer with Windows 95, Windows 98, or Windows NT.
• MTI-2031 DDC MANAGER JIG

AUTOMATIC COLOR ADJUSTMENT

• To input video, use 16 gray or any pattern using black and white.
• Select english for OSD language.
• Press the " (Enter/Source)" key for 5 seconds.

DDC - EDID DATA INPUT

• Input DDC EDID data when replacing AD PCB.
• Receive/Download the proper DDC file for the model from HQ quality control department.

OSD ADJUSTMENT WHEN REPLACING PANEL

1. Adjust brightness and contrast to 0.
2. Then, press the (Enter/Source) key for 5 seconds.
3. Service function OSD will appear on screen.
4. Press the + key to place the cursor on the panel. Press the menu key for 5 seconds.

OSD ADJUSTMENT WHEN REPLACING LAMP ONLY

• Adjust brightness and contrast to 0. Then, press the exit key for 5 seconds.
• Service function OSD will appear on the screen.
• Press the + key. Select upper lamp and press the menu key for 5 seconds.
• Then, select lower lamp and press the menu key for 5 seconds.

SERVICE FUNCTION:  TO DISPLAY SERVICE FUCNTION

1. The value for brightness and contrast should be changed to zero.
2. Within 5 seconds, press the (Enter/Source) key.
3. Service function OSD will be displayed.
4. To disable the service function OSD, you will have to power off.

The service function OSD is based on a grid of 29 columns x 12 rows.

The service function OSD consists of panel information, software version and MICOM checksum.

TO CONTROL SERVICE FUNCTION OSD

• With the panel selected on OSD, whenever you press the right key, the base color will change to blue from "Panel" to "Upper Lamp", "Lower Lamp".

• After changing the panel or lamp, must reset service function OSD.

The case of panel change:

1. After changing the panel, press the menu key within 5 seconds.
2. Then, panel Ch. No increases one step and the panel time information is reset to zero.
3. Simultaneously, other information is reset to zero (Upper/Lower lamp, Panel cycle).

In the case of Upper Lamp or Lower Lamp change

After changing the Upper Lamp or Lower Lamp;

1. Select the Upper Lamp or Lower Lamp
2. Press the Menu key within an 5 seconds.

Then, Ch. No and time will be reset to zero (selected item only).