EEPROM DATA UPDATE
- Before Update the EEPROM data, it is necessary to install the WRITING TOOLS into the PC.
- Set to the standby mode, and remove the back cabinet.
- Using the MICON PROGRAM JIG KIT 25-4 (JG203), connect the PC Terminal and Pin 1-4 of CP802 on the Main PCB (JG203(Red line) =1 pin of CP802).
- Set the EU LCD MICON VER UP ROM DISC (JG176) to PC.
- Start the "VCTP" (Writing Tools).
- Press the "NVM
- Press the "Change", and select the writing EEPROM data file (TEXT file).
- Press the "Update NVM from File".
- The following window will appear, writing will start. After the finishing of the writing, the window will close.
- Finish the writing, unplug the AC cord, and remove the MICON PROGRAM JIG KIT 25-4 (JG203).
- Insert the AC cord again, turn on the power.
- Press both VOL. DOWN button on the set and Channel button (2) on the remote control for 2 seconds.
- Confirm that displayed version agreement with writing.
