- Press keypad to enter Factory Mode.
- Press “Enter” key + “Channel Up” key together to enter Factory Mode
- Confirm software version.
THE ISP SOP FOR MST
- Connection PC to the Tv set by the tool as the follow picture.
- Action: The D_SUB cable must be 15 pin, and the TV set must be AC ON
DRIVER INSTALLATION
- Press 'Next' to continue.
- Press the “close”,the driver installation ok.
Start the Isp
- Open the “ISP_Tool V4.4.1.8.exe”
- Press the “config”, if the the ISP board have been found, you will see the picture as bellow.
- Pull away the AC power Cord and the D-SUB Cable. And start another TV set.
- When we start another TV set with AC ON, we only need to press the “RUN”
