BenQ - VA371 LCD TV - DISASSEMBLE PROCEDURE

DISASSEMBLE PROCESS

• Place TV on the table
• Remove M4*10 screw*6 from back cover.
• Left Stand from TV set

• Remove T4*12 screw*13 from back cover

• Remove NUT(A) *2 from EMI Shielding
• Remove T3*6 screw (B) *7 from EMI Shielding
• Remove M3*5 screw *1 from EMI shielding.

• Remove M3*5 screw *15 from EMI Shielding
• Left EMI shielding from TV sets

• Cable Dressing.

• Remove M3*5 screw *8 from MB,IO board
• Left MB,IO Board from PCBA tray.

• Remove Inv cable, Inv cable.
• Remove M3*5 screw*6 from Power Board
• Remove M4*6 screw*1 from PCBA Tray
• Remove M4*6 screw*1 from Power Board
• Left Power Board from PCBA Tray

• Remove T4*12 screw*8 from Speaker L,R
• Left Speaker L,R from front cover

• Remove M3*5 screw*4 from PCB Tray
• Left PCB Tray from LCD BKT

• Remove M4*6 screw*12 from LCD Support BKT L,R
• Left LCD BKT L,R from LCD

• Remove T4*12 screw*2 from LCD SUPPORT BKT R,L,

• Remove T4*12 screw*12 from LCD BKT up, down & Side BKT R,L
• Left LCD from front cover.

• Remove M4*6 screw*8 from LCD BKT up, down & Side BKT R,L
• Left LCD BKT up, down & Side BKT R,L from LCD Panel