HOW TO ENTER SERVICE MODE TO SHARP, VIZIO & PIONEER TVs

TO ENTER SERVICE MODE TO VIZIO TV
Method 1
Vizio TVs

1. Turn the Vizio TV off.
2. Press and hold the CH + & CH – buttons on the TV.
3. Then press and release the POWER button on the TV Vizio.
4. Release the CH+ & CH- buttons.
5. Press the MENU button on the remote.
6. You should get your regular menu up, but with a “F” in the bottom right corner of the menu (This if for factory reset).
7. Press and hold the MENU button for few seconds.
8. The Service Menu will be displayed.

Method 2

• Turn off th Vizio TV.
• Press and hold the CH+ & CH- buttons on the TV Vizio.
• Then press and hold the POWER button on the TV.
• Keep all three buttons pressed for few seconds.
• Press the MENU button on the remote.
• You should get your regular menu up, but with a “F” in the bottom right corner of the menu (This if for factory reset).
• Press and hold the MENU button for few seconds.
• Service Menu will be displayed.

TO ENTER SERVICE MODE TO SHARP CRT BASED TVs

1. Unplug the Sharp television.
2. Press and hold the VOL- & CH+ buttons.
3. While holding the above buttons, plug in the Sharp TV.
4. The TV will turn on with the Service Menu displayed.
5. To navigate use CH+ CH- buttons, Use VOL+ VOL- buttons to adjust the value.

TO ENTER SERVICE MODE TO PIONEER PLASMA TVs

Plasma Pioneer 3rd Generation Models procedure:

• Make sure the set is in standby
• Hold down INPUT + VOL+ buttons on the panel.
• Turn on the Plasma Pioneer at the panel.
• The service menu will come up.

Sharp Plasma TVs: 4th, 5th, 6th & 7th generation models

1. Make sure the Plasma and the Media Box are in standby.
2. Using the remote control, Press DISPLAY button (only press, do not hold) and wait 5 seconds.
3. Press {LEFT + UP + LEFT + RIGHT + POWER buttons.
4. The Pioneer Plasma will turn on and be in the service menu.