HOW TO ENTER SERVICE MODE TO BUSH - BAIER - BANG & OLFUSEN - BEKO - BLACK DIAMONND AND BRANDT TELEVISIONS

Universal remote code to check with Bush TV is [1056]

BUSH _ BAIER _ BANG & OLFUSEN _ BEKO _ BLACK DIAMOND _ BRANDT  
BUSH RF6694D

• Go to Bush TV main menu.
• Press simultaneously MUTE and INFO button.
• Change and select parameter press colored button To save  settings press ok
• Press menu to exit from service mode

BUSH ITV2112

• Open remote control cover, connect pin 10 and 17 of Samsung IC.
• Use colored button to select and volume to change value settings.
• To store press OK.
• To Exit press ‘0’ key.

BUSH WS66-7673

• Go to main menu and input [4 7 2 5]
• Use colored button to select and change settings.
• To save settings press OK.
• To exit from service menu press Menu button.

BRANDT TX807 _ ITC008

• TV in standby mode.
• Shut off TV using main switch button / no electric activity in your television.
• Next press [TXT] button and hold it.
• Switch ON your television using main switch.
• Press program + or program - to select and volume + or volume - to change the data value value.
• To save and exit press power button on remote control.

BRANDT TX91 _ TX91G

• TV in standby mode.
• Shut off TV with main switch.
• Press VT button on remote control and hold the key.
• Switch on TV with main switch.
• Release VT button and press VT buton again.
• Service menu mode load in 0.1 seconds.
• To change and select press program and volume button on remote control.
• To save and exit press power button on remote control

BLACK DIAMOND BDS1451UK

• Press Menu and press following key [4, 7, 2, 5.]
• Factory mode will load in 0.1 second.
• Use Red, Green, Blue, Yellow button to select and change.
• To save settings press Ok button.
• To exit from factory mode press MENU button.

BEKO TV22.1

• Select menu and enter key 9, 3, 0 1
• To select parameter press program up or program down.
• To change the data value press volume up to increase and volume down to decrease.
• Press Power button on the remote control to save and exit.

BAIER TV4K28MFV

• Factory mode button is hidden button located below STOP button, left to  cancel button.
• Press Red button go to next menu
• Press program up and down to select item.
• Press volume up and down to change value settings. 
• To Save and exit press P.P.

BANG & OLFUSEN LX4500 _ LX5500 _ LX5000 _ LX6000

• TV ON Press TV on remote control and short the pin service mode plugged p700 on PCB14.
• Select press p+/p- button and change value pres v+/v- button.
• Save change and exit press STOP button on remote control.