Using Pre-Programmed device codes.
- Manually turn on the device you wish to operate.
- Go to the SETUP mode by pressing both the MAIN and ENTER buttons simultaneously for three seconds until SETUP appears at the top of the LCD screen.
- Press the P-PRO button next to the LCD screen.
- The remote will be flashing “SELECT BUTTON”. Press the button for the device you wish to program. (For example, to program TV, press the TV button.)
- The remote will be flashing “FROM TABLE”. Select the device from which you want to access the code table.
- The remote will be flashing “ENTER NUMBER”. (If you are programming the remote for the TV device, find the TV device code table.). {See the previous post for setup code list}
- Point the remote control toward the device and enter the first three-digit code number you selected for your device. There is no way of knowing which code is the one that will have the functions that more closely match your device than the others, so it is wise to try them all.
- Important: enter the code number within 20 seconds of beginning programming, otherwise the remote will revert to the SETUP menu, and then after a period of time, it will go back to the MAIN device page. If there is more than one code number assigned to your brand, try one code number at a time until you find the right code number (the number that turns off your device.) If the device turns off when you enter the three-digit code, make note of the code. It will have at least some of the functions in it that are needed to control your device.
- Confirm that it is the right code by pressing the Power button. The device should turn on. After you have confirmed that the right code is entered, save the code by pressing the SAVE button on the LCD. At this point try ALL of the buttons on the remote, and see which ones work with your device. The majority of the buttons should work with your device. Make note of the code if it seems to be the right one, and try the next one. You are trying to find the one that has the most functions to operate your equipment.
- Continue to program other components by repeating from Step 1 above.
- You can press EXIT at any time if you do not wish to proceed.
