SERVICE MODE [FACTORY MODE]
- To enter “Service Mode” Press the remote -control keys in this sequence : If you do not have Factory remote – control.
[POWER OFF à MUTE à 1 à 8 à 2 à POWER ON]
- If you have a factory remote control.
[POWER ON à INFO à FACTORY]
EDID INPUT METHOD
- SAMSUNG LCD TV support the DDC control JIG. You can see the connection between PC and LCD TV. execute "WinDDC.EXE"
- Click "Open[F5]"
- Select Connected Port#1 and Click Next OK
Find
file name :
15
inch : VE15
17
inch : VC17
20 inch : VC20- Click Next (OK) button.
- Select enter button (on Key-Board) After Monitor S/N input.
- Check "DDC OK".
MICOM TDA15001H [PROGRAM UPGRADE]
PROGRAM UPGRADE JIG
Connect the parallel Port
Connect Jig to CN905 on PCB Ass'y
Click " WISP " Icon on Computer.
Check "Automatic mode on".
Click
"Browser" button : Select the Code , Click "Auto Execute"
button Check Erase and Write OK In "General" window and check Verify
OK in "ISP status" window.
