ARISTONA GR2.4 63TA71111
- Turn on television, press menu and hold and press menu on TV panel.
- Press colored button to select item.
- To change settings press volume up to increase and down to decrease value settings
ARISTONA MD1.2E
- To reset to default mode connect pin 42 and 43 together on small signal board #SSB#.
- Save and exit press power button on remote control go to standby mode.
APEX CN12C2, GT15 GT20 GT24 GT27 GT32
- Decrease the volume to no sound, press the quality button on the remote control, and the mute button on TV panel simultaneously.
- S will appear on the TV screen indicating the service mode state.
- To save the settings and exit from the factory mode press the standby button on the remote control.
AKIRA TB1238 14RBS3 21BSS3W
- Press the numbers [one and two] to go to a twelve channel.
- Press the number [three and eight] to go to thirty-eight channels.
- Press menu, menu lock and press mute and then enter the numbers [one, two, three, and eight.]
- Factory mode will open and you are ready to make further arrangements.
AKIRA 5N11 CT29N19
- Press the [volume down and volume up] simultaneously on the TV when it is off and then hold the button and turn on the television.
- Factory mode will open.
- Be careful and there should be no mistake, if there is a mistake entering the data will be damaged TV system.
- Always record the system data before make further arrangements.
ALBA CTV3418 11AK36
- Enter into the main menu and press the number 4725 in quick succession within the interval 5 seconds.
- Menu option press the red button, blue, green and yellow.
- To save the changes and press the ok button.
- To exit the factory mode press the Menu key.
AKAI CT V252NTF
- Go to menu function.
- In menu mode you press the number 4,7,2,5 on the remote control.
- Service mode will appear.
- To select the menu option press red, green, blue and yellow buttons in the remote control.
- To change the value press Vol + / -.
- Press OK button to store all settings.
- To Exit from factory mode press Menu button.
TOSHIBA
- Press mute on remote control and menu on Toshiba TV panel Simultaneously
- Press menu on Toshiba Remote, input these number (4, 7, 2, 5)
- Press Volume down on TV panel, press and hold key [9] on Remote control.
TOSHIBA
- Press MUTE button on control remote.
- Press mute button again to keep pressing.
- While pressing the mute button, press MENU button on TV set.
- The adjustment menu will be displayed.
- Press menu button on TV, [S] displaying on top corner of the screen.
- TV (ANT)/VIDEO button (On TV) : A single horizontal line ON/OFF
- TV (ANT)/VIDEO button (on remote control) : Test signal selection.
- Channel up/down (on TV or remote control) : Selection of the adjustment items.
- Volume up/down (on TV or remote control) : Change of the data value.
- Menu button (on TV) : Adjustment menu mode ON/OFF
- RECALL + Channel up button on TV : Initialization of the memory (QA02)
- RECALL + Channel down button on TV : Initialization of the self diagnostic data.
TOSHIBA
- Without menu on TV panel; Press AV & F Simultaneously.
- Enter this code [1, 0, 4,8].
- Factory mode will be displayed.
- To change value use volume key.
- To select parameters use program key.
JVC
- Simultaneously press DISPLAY and VIDEO STATUS on remote control .
- To select items, press MENU UP / DOWN (upload / download).
- To change values, MENU LEFT / RIGHT .
- To exit factory mode press EXIT.
