APPLICABLE TO:
LT-32BX18, LT-32BX18/B, LT-32BX18/BA, LT-32BX18/BB,LT-32BX18/E, LT-32BX18/EB, LT-32BX18/P, LT-32BX18/PB,LT-32BX18/S,LT-32BX18/SB, LT-32BX18/V, LT-32BX18/VB
- This TV is adjusted by using REMOTE CONTROL UNIT.
- The adjustment using the REMOTE CONTROL UNIT is made on the basic of the initial setting values. The setting values which adjust the screen to the optimum condition can be different from the initial setting values.
- Make sure that connection is correctly made AC to AC power source.
- Turn on the power of the TV and measuring instruments for warming up for at least 30 minutes before starting adjustments.
- If the receive or input signal is not specified, use the most appropriate signal for adjustment.
- Never touch the parts (such as variable resistors, transformers and condensers) not shown in the adjustment items of this service adjustment.
HOW TO ENTER AND EXIT SERVICE MODE
- Press [RETURN+] key and [MUTING] key on the remote control unit simultaneously to enter the SERVICE MODE SCREEN.
- Press the [MENU] key to exit the Service mode.
- [FUNCTION UP / DN] key. For scrolling up / down the setting items.
- [FUNCTION RIGHT / LEFT] key. For scrolling up / down the setting values.
- The setting value will be stored automatically when release the REMOTE CONTROL UNIT keys.
ADJUSTMENT MODE
- This mode is used to adjust the VIDEO CIRCUIT.
- When the SERVICE MENU SCREEN of SERVICE MODE is displayed, press [1] key to enter the ADJUSTMENT MODE.
- When a number key other than the [1] key is pressed in the SERVICE MODE SCREEN, the other relevant screen may be displayed.
- This is not used in the adjustment procedure. Press to the SERVICE MODE SCREEN.
- The signal displayed on the screen is displayed.
PAL50 :
PAL50Hz
PAL60 :
PAL60Hz
SECAM :
SECAM
NTSC3 :
NTSC3.58
NTSC4 :
NTSC4.43
525I : 525i
525P : 525p
625I : 625i
625P : 625p
750P5 :
750p 50Hz
750P6 :
750p 60Hz
1125I5 :
1125i 50Hz
1125I6 :
1125i 60Hz
1125P5 :
1125P 50Hz
1125P6 :
1125P 60Hz
Others
HXGA : HDMI
XGA
PCVGA : PC
VGA/60
PCXGA : PC
XGA/60
PCSXGA :
SXGA/60
PCSVGA : PC
SVGA/60
PCWXGA :
WideXGA(1360)/60
H525I :
HDMI 525i
H525P :
HDMI 525p
H625I :
HDMI 625i
H625P :
HDMI 625p
H750P5 :
HDMI 750p 50Hz
H750P6 :
HDMI 750p 60Hz
H125I5 :
HDMI 1125i 50Hz
H125I6 :
HDMI 1125i 60Hz
H125P5 :
HDMI 1125P 50Hz
H125P6 : HDMI 1125P 60Hz
FUL : FULL
PAN :
PANORAMIC
16Z : 16:9
ZOOM
SUB : 16:9
ZOOM SUBTITLE
14Z : 14:9
ZOOM
REG :
REGULAR
TEXT : TEXT
State of
the PICTURE MODE is displayed.
STD :
Standard
BRI :
Bright
SOFT : Soft
State of
the WHITE BALANCE MODE is displayed.
H : Cool
M : Mid
L : Warm
- Perform fine-tuning based on the "initial values" using the remote control when in the Service mode.
- The "initial values" serve only as an indication rough standard and therefore the values with which optimal display can be achieved may be different from the default values.
- [S004] to [S009] are the off set values.
